Regulator

  • Regulation valve HM



    By-pass pressure regulator HM

    • Inlet : F 3/8"
    • Outlet : M 3/8"
    • By-pass (BP) : F 3/8"
    • Manometer (MN) : F 1/4"
  • Regulation valve K

    By-pass flow sensitive valve K, brass and steel construction. Can resist from 200 to 250 bar depending on the valve.

    By-pass K1

    • Inlet : F 3/8"
    • Outlet : M 3/8"
    • By-pass : M 1/2"
    • Manometer : F 1/4"

    By-pass K5

    • Inlet : F 3/8"
    • Outlet : M 1/2"
    • By-pass : M 3/4"
    • Manometer : F 1/4"

    By-pass K7

    • Inlet : F 3/8"
    • Outlet : M 3/8"
    • By-pass : F 3/8"
    • Manometer : F 1/4"
  • Regulation PULSAR

    By-pass PULSAR 4

    • Optimized internal passages that guarantee reduced pressure loss.
    • Antirotation device of the piston positioned inside the valve and obtained by an hexagonal sector of the piston itself.
    • O-rings of the fittings positioned upstream to the thread : no risk of fittings ejected in case of overpressure.
    • Double feed connection.
    • Version with knob fitted with locknut for minimum working pressure adjustment. 
  • regulation valve TIMAX

    TIMAX Regulating Valve

    Manually adjustable, pressure-operated device which, according to its setting, limits the pump/system pressure by conveying the excess of water to the by-pass.

    When the outlet flow is blocked, this device totally releases the flow, thus keeping the pump/system at the adjusted pressure.

  • Regulation valve ULH
  • Regulation valve VB

    VB 7

    • Sturdy steel and brass construction. 
    • Adjustable locknut to control max pressure. 
    • Possibility to fit a venturi injector, on delivery, for chemicals. 
    • Plastic knob, upon request

    VB 85/280

    • Dynamic seals made up of O-ring and Back-up ring. 
    • Optimized internal passages that guarantee reduced pressure loss. 
    • Antirotation device of the piston positioned inside the valve and obtained by an hexagonal sector of the piston itself.
    • O-rings of the fittings positioned upstream to the thread : no risk of fittings ejected in case of overpressure. 
    • Double feed connection. 
    • Version with knob fitted with locknut for minimum working pressure adjustment.

    VB 9

    • Sturdy steel and brass construction 
    • Resetting of bypass at around 40 bar – 4 MPa which allows periods of non labour before the release for bypass setting.
    • Hexagonal shaped check valve to avoid jamming.
    • Version with knob, fitted with locknuts for min. and max. pressure regulation.
    • Possibility to fit a venturi injector, on delivery, for chemicals.

    VBA

  • Regulation valve VRT3

    By-pass pressure regulator VRT3

    • Equipped with two inlets and two by-pass outlets that make the valve easy to install in different positions.
    • Body made of brass. 
  • Regulation valve VRT100

    By-pass pressure regulator VRT 100

    • Body made of brass
    • Available with micro switch
  • Regulation valve VRZ
  • regulation valve UHP